Advertisement
Maya Desk
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
locking
bolt
dowel
screw
nut x8
x8
x16
x4
I
J
H
slide
slide
screw
rail x1
rail x1
x12
Hardware Supplied
Phillips & Flathead screwdriver and hammer required
mocka.co.nz | mocka.com.au
G
E
F
slide
screw
slide
rail x1
x10
rail x1
K
L
M
N
bolt
nut
dowel
dowel
bolt
x10
x10
x2
x2
W
X
wall
Safety
anchor
Strap
x1
O
x1
Y
Z
x2
screw
washer
x1
x1
Wall Strap
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Maya Desk
Summary of Contents for Mocka Maya Desk
- Page 1 Maya Desk Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Maya Desk Assembly Instructions Attach panel [15] to panel [7] while also attaching the safety strap (W) Attach 1x slide rail (F) ot panel [6] using 3x screws (E). Attach 1x slide using 3x screws (J) as shown. Tighten with a screwdriver.
- Page 3 Maya Desk Assembly Instructions Insert 6x bolts (C) into panel [1]. Attach panels [4], [5] and [6] to panel [1] using 6x dowels (A) and secure with 6x locking nuts (D). Tighten with a flathead screwdriver. mocka.co.nz | mocka.com.au...
- Page 4 Maya Desk Assembly Instructions Slide panel [9] down along the grooves between panels [4] and [5]. Attach panel [2] to panels [4], [5] and [6] using 6x dowels (A) and secure with 6x screws (J). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
- Page 5 Maya Desk Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Attach panel [3] to panel [2] using 3x screws (J) and tighten with a Attach panels [7], [15] and [8] to panel [17] using 2x dowels (A), 4x bolts screwdriver. (K) and fasten with 4x nuts (L). Tighten with a flathead screwdriver.
- Page 6 Maya Desk Assembly Instructions Attach panels [3] and [5] to panel [17] using 1x dowel (N), 1x screw (M), Attach panels [7] and [15] to panel [16] using 2x dowels (A), 2x bolts (K) 1x bolt (K) and secure with 1x nut (L). Tighten with a screwdriver.
- Page 7 Maya Desk Assembly Instructions Drawer Insert 2x bolts (C) into panel [10]. Attach panels [11], [12], and [14] Attach panel [10] to panels [11] and [12] using 2x dowels (O) and secure together using 4x screws (B). Tighten with a screwdriver. Slide panel with 2x locking nuts (D).
- Page 8 Maya Desk Assembly Instructions strap washer wall anchor screw Insert the assembled drawer, ensuring it slides smoothly and easily Use a drill to create a small hole lining up with the top of the safety strap along the rails. Lift the desk into the desired location, do not drag.
Need help?
Do you have a question about the Maya Desk and is the answer not in the manual?
Questions and answers