Basic Editing ─ Inserting An Applied Instruction - Delta DVP-ES3 Series Operation Manual

6.5.7 Basic Editing ─ Inserting an Applied Instruction
Add Network 6 under Network 5, and then write the program shown below. Insert an applied instruction in one
of the three ways described below.

Method 1
Click the position where you want to insert an instruction, type the instruction (INC in this example), and
then press Enter on the keyboard.

Method 2
Click APIs in the project management area and find the instruction type.
C h a p t e r 6 W r i t i n g a P r o g r a m
6_
6 - 1 9