Seco Qseven CQ7-A30 User Manual page 23

3.2.2 Jumpers list
Name Description
JP1 PCI-e lanes routing selection
JP4 Boot source selection
JP5 GP_1-Wire Bus mode selector
JP6 miniPCI-e Wireless operations enable
JP10 CAN voltage selector
JP11
120Ω CAN termination
JP12 POST Codes address selector
JP13 Battery/batteryless selection
JP14 LIDBTN#
JP15 FAN #0 voltage selection
3.2.3 Dip Switch list
Name Description
SW1 I2C EEPROM Address select
SW2 SuperIOs enable and address select
SW6 USB 3.0 / 2.0 ports selector
CQ7-A30
CQ7-A30 - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
Name Description
JP16 FAN #1 voltage selection
JP17 FAN #1 PWM control enable
JP18 MFG_NC3 Pull-up or pull-down
JP19 MFG_NC4 Pull-up or pull-down
JP20 MFG_NC2 routing to MFG or Debug USB connector
JP21 MFG_NC1 routing to MFG or Debug USB connector
JP23 AT/ATX mode selection
JP24 SRST# source selection
JP25 MFG_NC4 connection on CN41 pin #3
Name Description
SW11 GP_PWM / GP_Timer selector
SW12 XR28V384 COM #2 / #3 mode selector
23