Pcie2 Fh 4-Port 8 Gb Fibre Channel Adapter - IBM Power System Series Manual

Cables
Use multimode fiber optic cables with shortwave lasers that adhere to the following specifications:
• OM3: Multimode 50/125 micron fiber, 2000 MHz x km bandwidth
• OM2: Multimode 50/125 micron fiber, 500 MHz x km bandwidth
• OM1: Multimode 62.5/125 micron fiber, 200 MHz x km bandwidth
Because core sizes are different, OM1 cables can only be connected to other OM1 cables. For best
results, OM2 cables should not be connected to OM3 cables. However, if an OM2 cable is connected to an
OM3 cable, the characteristics of the OM2 cable apply to the entire length of the cables. The following
table shows the supported distances for the different fiber optic cable types at different link speeds.
Table 42. Supported distances for multimode fiber optic cables
Header
Rate
2.125 Gbps
4.25 Gbps
8.5 Gbps
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
devices. For information about operating system and partition requirements, see one of the following
topics:
• The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://
www.ibm.com/support/fixcentral/).
• Power Systems Prerequisites (http://www14.software.ibm.com/support/customercare/iprt/home).
• IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/
ssic/interoperability.wss).
• The latest version of the device driver or IBM Power RAID adapter utilities (iprutils) can be downloaded
from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/webapp/
set2/sas/f/lopdiags/home.html).
• For support details, see the Linux Alert website (http://www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.html).
PCIe2 FH 4-port 8 Gb Fibre Channel Adapter (FC EN12, CCIN EN0Y)
Learn about the specifications and operating system requirements for the feature code (FC) EN12
adapter.
Overview
The PCIe2 FH 4-port 8 Gb Fibre Channel Adapter is a PCI Express (PCIe) generation-2, full-height, high-
performance, x8 short form factor plus (SFF+) Host Bus Adapter (HBA). This adapter enables multiple
logical (virtual) connections to share the same physical port. Each logical connection has its own
resources and the ability to be managed independently. Each port provides single initiator capability over
a fiber link or provides multiple initiator capability with N_Port ID Virtualization (NPIV). The ports are
204 Power Systems: Managing PCIe adapters
OM1
0.5 meters to 150
meters (1.64 feet to
492.12 feet)
0.5 meters to 70 meters
(1.64 feet to 229.65
feet)
0.5 meters to 21 meters
(1.64 feet to 68.89 feet)
Cable Type and Distance
OM2
0.5 meters to 300
meters (1.64 feet to
984.25 feet)
0.5 meters to 150
meters (1.64 feet to
492.12 feet)
0.5 meters to 50 meters
(1.64 feet to 164.04
feet)
OM3
0.5 meters to 500
meters (1.64 feet to
1640.41 feet)
0.5 meters to 380
meters (1.64 feet to
1246.71 feet)
0.5 meters to 150
meters (1.64 feet to
492.12 feet)