Table of Contents
Advertisement
PCI-X Dual Channel Ultra320 SCSI Adapter SCSI Connectors
The adapter has the following external and internal connectors:
v External connectors:
– Channel 0 (J4), Channel 1 (J5), 68-position, VHDCI (very high density cable interconnect)
v Internal connectors:
– Channel 0 (J2), Channel 1 (J3), 68-position, high-density plastic D-shell SCSI standard connector for
16-bit attachment
Connectors J2 and J4 are connected as Channel 0. Connectors J3 and J5 are connected as Channel 1.
Attention:
Simultaneous use of internally and externally attached devices on the same channel is not
supported with this adapter. The following figure shows the external and internal channels.
Note: The adapter has built-in SCSI terminators on each channel that are automatically enabled when a
cable is attached to either the external or internal connector.
This adapter might be preinstalled in a hot-swap carrier for use in certain system types. This carrier allows
the adapter to be installed and removed without removing the top cover of the system in which it is
installed. Refer to the adapter installation and removal procedures located in your system's user or service
guide.
2
PCI-X Dual Channel Ultra320 SCSI Adapter Installation and Using Guide
Advertisement
Table of Contents
