Managing Pcie Adapters For The 9009-41A, 9009-42A, Or 9223-42H System - IBM Power System Series Manual

Table 3. PCIe3 SAS RAID internal adapters and controllers for the 9008-22L, 9009-22A, or 9223-22H
system
Feature Code
EJ1G
EJ1F
EJ1H
For more information about the PCIe3 SAS RAID controllers, see the following topics:
• SAS RAID controllers for AIX
• SAS RAID controllers for IBM i
• SAS RAID controllers for Linux
• SAS subsystem for the 9040-MR9

Managing PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H system

Find information about using and managing the Peripheral Component Interconnect Express (PCIe)
adapters that are supported for the IBM Power System S914 (9009-41A), IBM Power System S924
(9009-42A), or IBM Power System H924 (9223-42H) system. Also, find information about specifications
and installation notes for specific adapters.
Overview of managing PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H system
Find information about using and managing Peripheral Component Interconnect Express (PCIe) adapters.
The following features are electromagnetic compatibility (EMC) Class B features. See the Class B Notices
in the Hardware Notices section.
Table 4. Electromagnetic compatibility (EMC) Class B features
Feature
5748
5785
EN0W
The adapter information that is shown here is used during non-directed service activities. The information
can be used to:
• Identify an adapter
• Find specific technical information about an adapter
4 Power Systems: Managing PCIe adapters
Description
PCIe3 x8 cache SAS RAID
Internal adapter 6 Gb (FC EJ1G
and EL67; CCIN 57DC); Adapter
part number: 01JC780
Single - PCIe3 x8 SAS RAID
Internal Adapter 6 Gb (FC EJ1F;
CCIN 57D7); Adapter FRU
number: 01LK399
Split Disk - PCIe3 x8 SAS RAID
Internal Adapter 6 Gb (FC EJ1H;
CCIN 57D7); Adapter FRU
number: 01LK399
Description
POWER GXT145 PCI Express Graphics Accelerator
4 Port Async EIA-232 PCIe Adapter
PCIe2 2-port 10 GbE BaseT RJ45 Adapter
Function
FC EJ1G is used to support up to 8 small form-
factor disk drives or solid-state drives. It provides
SAS RAID 0, 5, 6, 10, 5T2, 6T2, and 10T2
functions. It also provides an external SAS port
that can be used to connect one external FC ESLS
or ESLL.
Note: The SAS YO cable that is used to attach a FC
ESLS or ESLL disk drive enclosure to the rear SAS
port must not exceed the maximum supported
length of 3 meters.
FC EJ1F provides just a bunch of disks (JBOD) or
RAID 0, 5, 6, and 10, functions for the attached
disk drives in the base function.
FC EJ1H is used to split the disk backplane into
two sets of four disks. It provides JBOD or SAS
RAID 0, 5, 6, and 10, functions for the attached
disk drives in the base function.