Handling the Gigabit Ethernet-SX PCI Adapter
Attention:
Ethernet-SX PCI Adapter in its static-protective bag until you are ready to install it in
your system unit.
Electrostatic Discharge Protection
Take the following precautions whenever you handle the Gigabit Ethernet-SX PCI
Adapter or other static-sensitive devices:
v If you have an anti-static wrist strap, use it while handling the adapter.
v Limit your movement. Movement can cause static electricity to build up around you.
v With the adapter still in its anti-static bag, touch it to an unpainted metal part of the
system unit, such as an expansion slot.
v Hold the adapter carefully by its edges. Avoid touching solder joints, pins, or other
printed circuitry.
v Do not place the adapter on the system unit cover or on a metal table. If you must
set it aside, put it back into its anti-static bag. Before you pick it up again, touch the
bag and metal frame of the system unit at the same time.
v Be very careful when you handle the adapter during cold weather, as low humidity
and heating increase static electricity.
Static electricity can damage your equipment. Leave the Gigabit
vii