IBM Power System Series Manual page 201

Cables
See "Cables" on page 187 for details
Voltage
3.3 V, 12 V
Form factor
Short, low-profile
Cables
See "Cables" on page 187 for details
Cables
This adapter feature requires the use of compatible SFP+, 10 Gbps, copper, twinaxial, active, Ethernet
cables. See Figure 67 on page 187 for a view of the cable top and cable bottom. These cables are
compliant with industry standard specifications SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4, and all
applicable IBM requirements.
Note: These cables are EMC Class A compliant.
See Table 37 on page 187 for details about the feature codes.
Figure 67. Top and bottom view of the cable
Table 37. Feature code, CCIN, and part number for varying lengths of the cable
Cable length
1 m (3.28 ft)
3 m (9.84 ft)
5 m (16.4 ft)
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
Feature code
EN01
EN02
EN03
CCIN
EF01
EF02
EF03
Managing PCIe adapters 187
Part number
46K6182
46K6183
46K6184