User Operating Instructions - Triton Hawaii 2 Installation And Operating Instructions Manual

SECTION
10
check list
Fig.21
Fig.22

USER OPERATING INSTRUCTIONS

Power selector
knob
Economy
High
STOP position
Start/Stop -
temperature
knob
Temperature knob
OPERATING THE SHOWER
To start the shower
The flow of water is controlled by the
START/STOP temperature knob. To start the
shower turn the knob to '1' or above (fig.21).
To stop the shower
Turn the knob clockwise past start to the start
graphic to the 'STOP' position and water will
cease to flow (fig.21).
If restarting immediately after stopping,
be aware that a slug of hot water will be
expelled for the first few seconds.
• Turn the Temperature Knob to a higher
number to make the water Hotter (fig.22).
• Turn the Temperature Knob to a lower
number to make the water Colder (fig.23).
Power knob
• The power knob (fig.24) has two positions,
ECONOMY and HIGH.
• Single red symbol is the economy setting
for using less power during warmer months
when the ambient water temperature is high.
NOTE: If the stated flow rate required for the
unit cannot be met due to low water pressure,
it will be necessary to operate the unit on this
setting during the warmer months because of
flow rate limitations entering the unit.
• Double red symbol is the high setting
which allows the highest flow achievable
for your preferred temperature. This setting
should be regarded as normal for optimum
shower performance throughout the year.
14
WARNING