User Operating Instructions ............................................. 8 - Triton TAMAS Installation And Operating Instructions Manual

Fig.8
Power On indicator
USER OPERATING INSTRUCTIONS
Low
pressure
indicator
10
OPERATING FUNCTIONS
Power on indicator
• When the electricity supply to the shower is
switched on at the isolating switch, the power
indicator will light up.
Low pressure indicator
• If this indicator lights, this means the water
pressure has fallen below the minimum
required for correct operation of the
shower, resulting in the low pressure cut-out
operating. This switches off power to the
heating elements preventing any undue
temperature rises. The shower will operate
on the COLD setting until there is adequate
water pressure which automatically restores
the power to the elements.
Phased shutdown
• In use, every time the Start/Stop button
is pressed, power is switched off to the
elements. Water will continue to flow for a
few seconds, flushing out any remaining hot
water. This makes sure the next immediate
user will not receive a slug of hot water if
standing under the showerhead when starting
the shower.
Safety cut-out
• The unit is fitted with an over-temperature
safety device. In the event of abnormal
operation which could cause unsafe
temperatures within the unit, the device will
disconnect the heating elements.
NOTE: It will require a visit from a qualified
engineer to identify the nature of the fault and
replace the safety device.
-
(fi g.8)