Step 2: Install the Router
Tools Required to Install the Router in a Rack
Install the Mounting Brackets
Copyright © 2016, Juniper Networks, Inc.
Tools Required to Install the Router in a Rack on page 7
Install the Mounting Brackets on page 7
Install the ACX2200 Router in the Rack on page 8
To install the router in a rack, you need the following tools:
Phillips (+) screwdriver, number 2
ESD grounding wrist strap
Two mounting brackets for front or rear mounting ship with the router (see
Figure 4 on page 7
and
Figure 5 on page
Attach both mounting brackets to either the front or rear of the chassis:
Align the bracket with the two sets of mounting holes.
1.
Insert the four screws at the top and bottom of the bracket and tighten each partially.
2.
Tighten the four screws completely.
3.
Repeat the procedure for the other bracket.
4.
Figure 4: Installing the Mounting Brackets to the Front of the ACX2200
Router
Figure 5: Installing the Mounting Brackets to the Rear of the ACX2200
Router
7).
Step 2: Install the Router
7