Table of Contents
Advertisement
ACX2200 Quick Start Description
Copyright © 2016, Juniper Networks, Inc.
This Quick Start contains information you need to install and configure the router quickly.
For complete installation instructions, see the ACX2200 Universal Access Routers Hardware
Guide.
WARNING:
This Quick Start contains a summary of safety warnings in
Warnings" on page
translations, see the ACX2200 Universal Access Routers Hardware Guide.
The ACX Universal Access Routers are Ethernet-optimized mobile backhaul routers that
provide both switching and carrier-class Ethernet routing. The ACX Series routers enable
a wide range of business and residential applications and services, including microwave
cell site aggregation, MSO mobile backhaul service cell site deployment, and service
provider or operator cell site deployment. The ACX2200 routers have high-density Ethernet
interfaces and high-capacity switching throughput.
The routers are single-board routers with a built-in Routing Engine and one Packet
Forwarding Engine. The Packet Forwarding Engine has one "pseudo" Flexible PIC
Concentrator (FPC 0). Because there is no switching fabric, the single Packet Forwarding
Engine takes care of packet forwarding.
The compact routers are one rack unit (U; that is, 1.75 in., or 4.45 cm) tall. Several routers
can be stacked in a single floor-to-ceiling rack for increased port density per unit of floor
space.
The ACX2200 routers contain four Gigabit Ethernet RJ-45 ports, four Gigabit Ethernet
combination ports (either four Gigabit Ethernet RJ-45 ports or four Gigabit Ethernet SFP
ports), two Gigabit Ethernet SFP ports, and two 10-Gigabit Ethernet SFP+ ports. Use
only one set of these combination ports (labeled
Figure 1 on page 4
and
Figure 2 on page 4
20. For a complete list of warnings for this router, including
COMBO PORTS
shows the front panel of the ACX2200 router.
ACX2200 Quick Start Description
"Safety
) at a time.
3
Advertisement
Table of Contents
