Jeep COMPASS 2020 Owner's Manual page 58

56 GETTING TO KNOW YOUR VEHICLE
Icon
Faceplate Blower Knob
Blower Control
Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds
available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using
either the blower control knob on the faceplate or the buttons on the touchscreen.
Touchscreen Blower
Faceplate: The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting. The

Buttons blower speed decreases as you turn the blower control knob counterclockwise.
Touchscreen: Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower

setting. Blower can also be selected by pressing the blower bar area between the icons.
Faceplate Mode Button
Mode Control
Mode Control regulates the airflow distribution. The airflow distribution outlets are: instrument panel outlets, floor outlets,
defrost outlets, and demist outlets.
Touchscreen Mode
Faceplate: Push the Mode Button to change the airflow distribution mode.
Buttons
Touchscreen: Press one of the "MODE" buttons to change the airflow distribution mode.
The Mode settings are as follows:
Description