Advertisement
TESTING CONNECTION
Before proceeding to the preparation/installation please test the modules
functionality by connecting the provided vehicle specific I-harness (diagram
below). Once the module is connected, place the Qi-enabled device on the module
and refer to the LED Status chart below for specifics. For technical assistance wtth
the installation please call or visit us on the web at:
1-800-363-4490 x1
The module can also
Nola:
be tested by connecting it to
a USB to type-c connection
power source (not included).
FOREIGN OBJECT DETECTION: Please follow the MAGICPLATE
2 or 3 for best charging results. Note that blocking the charging coil with anything metallic object
may cause the module to not work as designed.
BATTERY VOLTAGE REQUIREMENTS: The MQUSM (Qi Module) is designed to operate at
voltages between 13.2-14.7. If your vehicle does not supply sufficient voltage with the ignition OFF,
you may need turn the ignition to the ON position in order to operate the MQUSM. For questions
about this product please contact our Scosche tech support team at:
www.scosche.com/contact.
LED CHARGING STATUS: The LED indicator on the side of the mount
illuminates the charging status of the device. When powered ON, the indicator
blinks in the following order: BLUE, GREEN, BLUE.
= Green
Standby
= Blue
Charging
7. Carefully drill a hole through the
frame support near the top on the
passenger's side. Note make the
hole large enough to pass the type-c
connection through. Reference the
illustration on the right.
TESTING QI MODULE (MQUSM)
I
www.scosche.com/contact
:����:
Female Connector to
12V harness connector
Male Connector to
Back of 12V Socket
PREPARATION
™
mounting instruction on pages
6
To Qi Module
(MQUSM)
To Qi Module
(MQUSM}
ext,
(800) 363-4490
Continue on page 7
1 or
Advertisement
