Checking Assembly - Set Up; Game Test Mode - Sega RALLY 3 DELUXE Owner's Manual

6-6

CHECKING ASSEMBLY - SET UP

When he machine has been switched ON for the first time after installation, open the
Coin Door and Press the 'TEST' Button which is located on the VTS board at the back
the compartment. This will give entry to the 'TEST MENU'
A = TEST;

GAME TEST MODE

The following options are available from the System Menu Test
Use the SERVICE Button to move the cursor to the desred test tem.
Press the TEST Button to enter the selected tem.
The following 4 TEST should be selected and checked individually to prove the functionality
of all peripheral components. For full information on all the Test and Set Up Procedures,
go to Chapter 9 - EXPLANATION OF TEST AND DATA DISPLAY
INPUT TEST
OUTPUT TEST
SOUND SETTINGS
SCREEN TEST
EXIT
B = SERVICE;
TEST MENU
PLAYER 1
>>
SYSTEM INFORMATION
INPUT TEST
OUTPUT TEST
MOTION BASE TEST
COIN SETTINGS
SOUND SETTINGS
SCREEN TEST
NETWORK TEST
CALIBRATE INPUT
BOOKKEEPING
CLOCK SETTINGS
GAME SETTINGS
RESET TO FACTORY DEFAULT
EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Test routne for the INPUT perpherals.
Test routne for the OUTPUT perpherals.
Test routne for the AUDIO OUTPUTS.
Test routne for the DISPLAY SCREEN.
To EXIT the Routne
C = VOLUME CONTROL;
6
21