Checking Assembly (Set Up) - Sega PRIMEVAL HUNT Owner's Manual

6-6 CHECKING ASSEMBLY - SET UP
THE MACHINE COMES WITH PRE-INSTALLED SOFTWARE, WHICH ALLOWS YOU TO GO
STRAIGHT INTO CHECKING ASSEMBLY - SET UP. HOWEVER IF THERE IS A REQUIREMENT
TO RE-INSTALL SOFT WARE FOR ANY REASON - SEE "CHAPTER 17" FOR DETAILS.
The Installation 'TEST MODE' ensures that the assembly has been made correctly and
the IC BD is satisfactory (refer to Chapter 9).
Refer to the LINDBERGH Service manual for details on "SYSTEM TEST MODE" and
"Chapter 9-3. GAME TEST MODE" for details on the |Game Test.
1
• DISPLAY TEST
When the 'MONITOR TEST' s selected f��m the 'S�stem Test Menu Sc�een' a sc�een
the CRT M�nt�� wll be dspla�ed. Th�ugh the DISPLAY s p�e-adjusted at
shpment f��m the fact���, vew the test sc�een t� dete�mne whethe�
necessa��. If s� �efe� t� Chapte� � and adjust the dspla�.
Remembe� t� chec� b�th MAIN GAME DISPLAY and TOUCH SCREEN DISPLAY.
1
(BLUE)
(GREEN)
(RED)
(WHITE)
MONITOR TEST 2/2
PRESS TEST TO EXIT
MONITOR TEST 1/2
PRESS TEST TO EXIT
�� n�t adjustment s
32
6-6 Fig 01
6-6 Fig 02
t � t e s t
t h e t  m e � f
6
25