1.8 SERVICE PRECAUTIONS
1.8.1 HANDLING ROLLERS
The surfaces of the main rollers (original feed roller, original exit roller, registration
roller, and exit roller) are covered with a soft urethane coating. This coating is soft and
can be damaged quite easily (even with a fingernail).
Never touch the surface of these rollers with bare hands.
Always hold the rollers by the bare ends where they are not coated.
Never use any type of strong organic solvent to clean the surface of these rollers.
Use only a cloth very slightly dampened with alcohol or water to clean the rollers.
D124
34
Detailed Descriptions