7.2.3 FLUSH PRINT HEADS
Flushing a print head consumes ink. Never flush a print head until you have
followed the procedure above to clean it at least three times.
1. Touch [Flush Print-heads].
2. Select the print head where the pattern is broken, and then touch [Start]. A
message asks you to wait while the print head is flushing. Flushing a print head
requires about 3 minutes.
3. When the message tells you that the flushing is completed, touch [Exit].
4. The display will loop back to the Maintenance Menu. Touch [Print Nozzle Check
Detailed Descriptions
145
D124