[A]
[B]
[C]
[D]
The Nozzle Check Pattern in this example shows that three print heads require
cleaning.
3. Touch each selection once to select the print head for cleaning, and then touch
[Start]. A message will ask you to wait while the print heads are being cleaned.
Cleaning one print head takes about 60 sec.
The Magenta and Yellow print heads require about 120 sec.
4. When the message tells you that print head cleaning has completed, touch [Exit].
Detailed Descriptions
Black 1
Black 2
Cyan
Magenta, Yellow
Normal
Abnormal
Abnormal
Abnormal
143
D124