Paper Feed - Ricoh D124 Detailed Descriptions Manual

1.7.3 3 PAPER FEED

No.
1 Paper entrance sensor
2 Paper feed roller
3 Paper exit sensor
4 Paper standby position (RU 1)
5 Paper standby position (RU 2)
6 Pre-registration sensor
7 Bypass sensor
1. Paper feed begins immediately from Roll Unit 1 if it was selected for the job.
-or-
If Roll Unit 2 was selected for the job with paper from Roll Unit 1 at the registration
standby position, the machine reverse feeds the paper down to the paper standby
position below the pre-registration sensor, and then feeds paper from Roll Unit 2.
2. Paper feeds past the registration roller and stops.
D124
Item No.
8 Registration roller
9 Registration standby position
10 DRESS sensor
11 Paper leading edge
12 Cutter
13 Exit roller
14 Exit sensor
28
Item
Detailed Descriptions