Raising And Lowering The Print Heads - Ricoh D124 Detailed Descriptions Manual

 Head limit sensor 1 (4) detects the actuator when the carriage is lifted to its
highest point and stops the motor.
 Head limit sensor 2 (5) detects the actuator when the carriage is lowered to its
lowest point and stops the motor.
 When the carriage unit is raised to the selected height, the cam locks in place and
the carriage unit disengages from the head lift motor.

6.7.2 RAISING AND LOWERING THE PRINT HEADS

The carriage unit and print heads can be raised to two high positions (1 mm, 2 mm) to
eliminate smearing caused by the print heads rubbing across the surface of thick
paper.
The Prevent Paper Abrasion setting must be done with the User Tools menu
before starting the print job.
1. Press the
2. Touch [System Settings], touch [Next], and then touch [Prevent Paper Abrasion].
3. The first selection is for a bypass print job. The second and third selections are for
Roll Feed 1 and Roll Feed 2, respectively.
Detailed Descriptions
on the machine operation panel.
119 D124