Ricoh D124 Detailed Descriptions Manual page 96

Paper Fan Duty is Adjusted
31. The duty of the transport fan is automatically adjusted for the size of the paper and
type of paper selected for the print job.
32. The suction of this fan below the platen keeps the leading edge of the paper flat
against the platen during paper registration and prevents the paper from floating
free during printing. For more, see "Transport Fan Duty Adjustment" in this
document.
Paper Cutting
If the operator selected paper cutting, the cutter cuts the paper.
33. Horizontal motor ON > Carriage moves to left side of the machine and stops.
34. Paper feed motor > ON at 35 mm/s and vertical motor> ON at 100 mm/s
35. Paper feeds 200 mm past cutter > Paper feed motor > OFF > Vertical motor OFF.
36. Cutter starts the cut.
37. Cutter completes the cut when it reaches the left side of the machine.
38. Cutter return sensor switch ON > Cutter motor drives the cutter back to its home
position on the right.
39. Paper feed motor > ON reverse feeds and stops.
40. Vertical motor > ON then stops when DRESS sensor detects the leading edge at
the paper registration position.
41. END.
D124 90 Detailed Descriptions