Table of Contents
Advertisement
4.8 BYPASS FEED
No.
1
2
3
4
Here are the steps for loading paper in the bypass paper path:
1. First, the operator rewinds the roll paper onto the roll so there is no paper in the
paper path.
2. Next, the operator presses the bypass feed icon on the Copier screen, and then
presses [#]. This opens a menu so the paper size and orientation can be selected.
3. The operator raises the front cover, and then raises the paper holding lever on the
right side of the machine.
4. The paper must be inserted with the right edge of the paper on the alignment mark
[A] at the right end of the platen.
Detailed Descriptions
Item
Bypass sensor
DRESS sensor
Carriage unit
Registration standby position
93
D124
Advertisement
Table of Contents
