Scanning - Ricoh D124 Detailed Descriptions Manual

1.7.2 2 SCANNING

1. The operator selects the paper feed station.
2. The original is laid face down on the original table.
3. The scanner unit grabs the original and feeds it a short distance.
4. The original set sensor detects the presence of the original and the array of
original width sensors detect its width.
5. The scanner motor switches on and rotates the original entrance roller and original
exit roller to feed the paper past the CIS unit, which is below the original path
6. The original is fed to the upper exit. If the original guide has been removed, the
original feeds straight out the back of the machine.
Detailed Descriptions 27 D124