Henny Penny SpaceSaver Plus Team Service Instructions Manual page 34

Service menu - appliance test
INFORMATION
Overview
Assigning the backup relay
Canceling the selection Touch the "Back" field.
Relay overview
Relay Connect
or
K1 X10
K1 X11
K2 X11
K4 X12
K5 X12
K6 X12
K8 X17
K17 X12
Dismantling and re-
programming
34
In case of changes to the wiring, label or deposit note in the unit.
Select the defective relay by means of the roller.
Touch the "OK" field.
Changes saved.
No. Description
2 Main contactor Q1
1 POS A
2 POS B
3 Magnetic valve for water vapor
elimination K12
4 Siphon pump G24
5 Backup relay K6
1 Solenoid fresh air M8
1 Circulating pump G16
After changing the control board the original state is restored. Thus,
the backup relay is not used unnecessarily.
Establish the original condition of the wiring (from X12. 5 to Xx).
Calling up the "Backup relay" in the Service menu.
Select "OFF" using the roller.
The backup relay is deactivated.
Touch the "OK" field.
Changes saved.
Service instructions
Instruction
Reconnect the line from X10.2 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X11.1 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X11.2 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X12.3 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X12.4 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X12.5 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X17.1 to X12.5 and to
assign a reserve relay to it.
Reconnect the line from X12.1 to X12.5 and to
assign a reserve relay to it.