Configuration - Henny Penny SpaceSaver Plus Team Service Instructions Manual

9.2.2 Configuration

Connector X1
Connector X5 CAN bus line to the motor M10
Connector X7 MMI communication
Connector X8 Digital key contains device-specific information.
Connector X9 (24V DC)
Connector X10 (208V AC)
Connector X11 (208V AC)
Connector X12 (208V AC)
Connector X13 (potential-
Connector X14 Not assigned
No.
1 Input 24 V DC for lighting
2 Output 24 V DC for lighting
3/4 Control board I/O voltage supply (24 V AC)
No.
1/2 24 V DC supply for operating panel (MMI)
No.
1 208 V input voltage for components
2 Output K1, main contactor Q1 (via thermal switch
and safety temperature limiter)
3/4 -
5 N
No.
optional
1 Output K1, POS A
2 Output K2, POS B
3 Input 208V, POS C
4 -
5 N
No.
1 Output K17, WaveClean pump G16
2 -
3 Output K4, solenoid valve K12
4 Output K5, siphon pump G24
5 Output K6, backup relay
6 -
7 N
No.
free)
1 Input K10, 208 V AC
2 Output K10, 208 V AC (switching hood to high-
speed)
Service instructions
Description
Description
Description
Description
Description
Description
Electronics
47