Overtemperature Control (Tmp_Id2); Risk Of Frost (Tmp_Id72) - Henny Penny SpaceSaver Plus Team Service Instructions Manual

10.6 Overtemperature control (TMP_ID2)

Description The temperature sensor on the control board is measuring a
Troubleshooting Contact manufacturer.

10.7 Risk of frost (TMP_ID72)

Description The unit is not ready for use. The temperature sensor on the control
Troubleshooting
temperature of >75°C. The unit is no longer operational until it cools
down.
board is measuring a temperature of <0°C.
Increase the room temperature and switch on unit again.
Change location of the unit.
Service instructions
Error messages
55