Task Force Tips Masterstream 4000 ER Automatic Instructions For Safe Operation And Maintenance
  1. Manuals
  2. Brands
  3. Task Force Tips Manuals
  4. Firefighting Equipment
  5. Masterstream 4000 ER Automatic
  6. Instructions for safe operation and maintenance

Task Force Tips Masterstream 4000 ER Automatic Instructions For Safe Operation And Maintenance

Nozzles
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
G-Force
INSTRUCTION FOR SAFE OPERATION AND MAINTENANCE
WARNING
AUTOMATIC
600 - 4000 GPM @ 80-120 PSI
(2350 - 15,000 LPM @ 5.5-8.3 BAR)
SELECTABLE
2000, 3000, 4000 GPM @ 100 PSI
(7500, 11,000, 15,000 LPM @ 7 BAR)
TASK FORCE TIPS LLC
MADE IN USA · tft.com
©Copyright Task Force Tips LLC 2020
Automatic and Selectable Nozzles
Understand manual before use. Operation of this device without understanding the manual and
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial-
number.
This equipment is intended for use by trained and qualified emergency services personnel for
firefighting. All personnel using this equipment shall have completed a course of education
approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the
operation, servicing, and safety procedures associated with this product. This manual should be
kept available to all operating and maintenance personnel.
Masterstream 4000 ER
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 · 219-462-6161 · Fax 219-464-7155
1
LIM-032 November 30, 2020 Rev01

Advertisement

Table of Contents
loading

Related Manuals for Task Force Tips Masterstream 4000 ER Automatic

Summary of Contents for Task Force Tips Masterstream 4000 ER Automatic

  • Page 1 (7500, 11,000, 15,000 LPM @ 7 BAR) TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 · 219-462-6161 · Fax 219-464-7155 MADE IN USA · tft.com ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

  • Page 2: Table Of Contents

    Stream reach and height at non-optimal elevations can be estimated as a factor of the performance at the optimal 30° elevation. SECTION 4.14 SECTION 4.5 Refer to LIM-030 and LIM-035 for effective stream trajectories of Task Force Tips Masterstream nozzles at 30° elevation. Multiplex Interface Control (YE-CAN#) Tethered Operator Station This graph cannot be used to estimate maximum reach for elevation angles below 30°.

  • Page 3: Meaning Of Safety Signal Words

    NFPA 1962, if dissimilar metals are left coupled together, an anti-corrosive lubricant should be applied to the connection and the coupling should be disconnected and inspected at least quarterly. ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

  • Page 4: General Information

    GENERAL INFORMATION The Task Force Tips Masterstream 4000 ER Series deluge nozzles have a clean, far reaching straight stream capability and are available with automatic pressure control or selectable gallonage. While flowing, the stream pattern can be varied from wide fog to straight stream.

  • Page 5: Specifications

    Dents or nicks in the nozzle tip can seriously affect the stream reach or pattern, which may increase CAUTION the risk of injury due to exposure. Care must be taken to avoid dents or nicks in the nozzle tip. ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

  • Page 6: Automatic Nozzle Operation

    3. Thread the flow selector pegs into the counter-bored holes in the baffle cap aligned with holes in the gallonage selector until hand tight. INDICATOR REMOVE WINDOW Figure 5.4 ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

  • Page 7: Flow Characteristics

    FLOW CHARACTERISTICS MASTERSTREAM 4000 ER AUTOMATIC Within its flow range, the Masterstream 4000 ER automatic nozzle operates at the nominal pressure of 80-120 PSI (5.5-8.3 BAR, 550- 830 kPa). The following chart shows the typical performance of this nozzle. MASTERSTREAM 4000 ER AUTOMATIC...

  • Page 8: Stream Trajectory Data

    MASTERSTREAM 4000, 120 psi (8.3 bar, 830 kPa) HORIZONTAL DISTANCE (FEET) l/min CURVE FLOW REACTION CURVE FLOW REACTION 2300 1000 3800 2000 1200 7600 3000 1700 11000 4000 2300 15000 1000 Figure 6.3C ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

  • Page 9: Flushing Debris

    In the event of a blockage, it may be necessary to retreat to a safe area, uncouple the nozzle and remove debris. Baffle and Orifice Control Components Selectable Nozzle Automatic Nozzle Figure 7.0 ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

  • Page 10: Warranty

    WARRANTY Task Force Tips LLC, 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its products (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the five (5) year period from the date of purchase.

  • Page 11: Maintenance

    Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at tft.com for parts lists, exploded views, test procedures and troubleshooting guides.

  • Page 12: 11.0 Operation And Inspection Checklist

    Operating equipment that has failed the checklist is a misuse of this equipment. TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 · 219-462-6161 · Fax 219-464-7155 MADE IN USA · tft.com ©Copyright Task Force Tips LLC 2020 LIM-032 November 30, 2020 Rev01...

This manual is also suitable for:

Masterstream 4000 er selectable

Table of Contents