Installation and Operating Instructions
NOTE
Fan-casing-type ELS-GUB..
4.4
Installation of mounting holder ELS-MB for plasterboard systems
Scope of delivery:
Mounting holder
2x hexagon head screw
2x hexagon nut
Wall-plugs, screws are not provided by Helios !
The fastening at the plasterboard system is carried out with plasterboard system specific brackets or wall
holders (Pos.a).
fig.12
Drill holes for scre entry in casing (Ø 6 mm)
fig.14
fig.16
Press-Pin
fig.13
Mounting holder can be
shortened at the notch.
fig.15
Pos a.
fig.17
Press on plaster-
board!
8
Pos a.