Sartorius Entris II BCA Advanced Series Operating Instructions Manual page 31

Parameters Settings
Instability
Start Automatic
Manual*
* Factory setting
Parameters of the "Checkweighing" Application
Parameters Settings
Min
Max
* Factory setting
Parameters of the "Peak hold" Application
Parameters Settings
Apply At stability*
Without
stability
* Factory setting
Parameters of the "Counting" Application
Parameters Settings
Reference
Accuracy Normal*
10-fold
* Factory setting
Explanation
Sets the intensity of the "Animal activity" to "very active" . Recommended for very
active movements of the sample .
Sets the intensity of the "Animal activity" to "medium" . Recommended for
medium movements of the sample .*
Sets the intensity of the "Animal activity" to "calm" . Recommended for minor
movements of the sample .
Sets the trigger to start the "Animal weighing" application to "automatic" .
The "Animal weighing" application must be manually selected in the start screen .
Explanation
Defines the lower limit (minimum) .
Defines the upper limit (maximum) .
Explanation
Peak holds are applied when there is stability .
Peak holds are applied without stability .
Explanation
Defines the number of reference pieces .
Operating Concept
Entris II Advanced Line Operating Instructions
®
31