Buttons - Sartorius Entris II BCA Advanced Series Operating Instructions Manual

4 .7

Buttons

Symbol Name
[On/Off] button
[Zero] button
[Tare] button
[Print] button
[Menu] button
[isoCAL] button
[Leveling] button
[Start leveling]
button
[Ambient
condition] button
[Application
filter] button
[Toggle between
weight units]
button
[Invalid weight
value] button
[Exit GLP] button
[Start GLP]
button
[Apply] button
[Start] button
[End] button
Description
− When the button is pressed: Switches the operating display on .
− If the button is held down: Switches the operating display to standby mode .
Zeroes the device .
Starts taring .
Exports the readouts to the integrated data interfaces .
Opens the main menu .
− If the button is highlighted orange: Indicates that the device needs to be
calibrated and adjusted .
− Starts the isoCAL function .
− Indicates that the device is leveled .
− In the main menu: Opens the Leveling Wizard .
− Indicates that the device needs to be leveled .
− Starts the Leveling Wizard .
Switches between the ambient conditions "v . stable", "stable", "unstable", and
"v . unstable" .
Switches between the "weighing" and "dosing" application filters .
− Once the weight value is stable: Indicates the set weight unit, e .g ., [g] for
"grams" .
− When the button is pressed: Opens the settings for toggling between weight
units and for accuracy .
− For conformity-assessed models only .
− Indicates that the weight value is invalid .
− When the button is pressed: Opens a message for rectifying the problem, e .g .,
that the device needs to be leveled .
Exits the GLP printout and starts printing the GLP footer .
− Starts the GLP printout and starts printing the GLP header .
− Prints the defined batch and/or sample ID .
Adopts the next component or the next weight value .
Starts an application .
Ends an application .
Operating Concept
Entris II Advanced Line Operating Instructions
®
13