Sartorius Entris II BCA Advanced Series Operating Instructions Manual page 18

Operating Concept
Level 1 Level 2
Printout Printout
Manual print
Automatic print
IDs
SBI protocol SBI function
Manual print format
Automatic print
Connections PC-USB
USB
RS232
18 Entris II Advanced Line Operating Instructions
®
Level 3 Description
ISO / GLP printout Only active if "Manual with stability" or
"Manual without stability" is selected in
Tare after print
"Printout" .
Manual print format
Auto print interval Only active if "Printout", "Autom . with
stability" or "Autom . without stability" is
Interval time
selected in "Printout" .
Auto print format
Set device ID Only active if ISO / GLP printout is
activated .
Set additional ID
Batch ID function
Batch ID2 function
Sample ID function
Sample ID2 function
Only active if "Manual with stability" or
"Manual without stability" is selected in
"SBI function" .
Autom . print cancel Only active if "Autom . with stability" or
"Autom . without stability" is selected in
Auto print interval
"SBI function" .
Interval time
Autom . print format
Device used
Device / Protocol Only active if a PC is connected .
Spreadsheet Only active if "PC spreadsheet" is
selected under "PC USB / device/
protocol" .
Device used
Device / Protocol The submenu depends on the device or
storage medium connected .
RS232 configuration Only active if "SBI" or "xBPI" is selected
under "USB / device/protocol" .
Device / Protocol
RS232 configuration Only active if "SBI" or "xBPI" is selected
under "RS232 / device/protocol" .
Foot switch function