Regency City Series Owners & Installation Manual page 62

CITY SERIES
installation
7. Install venting before proceeding (see unit manual for details).
Install venting
8. Finish the wall with desired finishing material and install rear enclo-
sure venting (see manual for finishing/venting requirements).
Finish wall
9. Finish up to the dashed line on the base part—DO NOT finish past
this line.
| CV40E-11 City Series
62
919-809
10. Install inner panels (refer to instructions in unit manual).
11. Install glass panels onto base panels (glass panels are secured in
12. Glass panels should overlap with outer side liner panel as shown
Finish to the dashed
line only
NOTE: Remove side liner panel and extended view panel to access
firebox.
Base panel with finishing
2
Install inner panels
place with magnets).
Install glass panels
below.
Correctly installed glass panels
01.13.20