Nuova Simonelli Microbar II Service Manual page 52

When refitting the parts, the engineer will need to:
6 Screw on the top grinder completely until it
touches and then turn it half a turn back.
7 Refit the adjustment screw.
8 Secure it to the grinder and reassemble the
whole unit.
9 Use the relevant screw to adjust grinding fine-
ness to obtain the desired coffee quality.
5.3
CHANGING THE CONDENSER
To access the condensers, the service engineer will
have to:
1 Switch OFF the machine.
2 Remove the right panel by taking out the two Allen
screws from the top.
5.4
SERVICE MANUAL
6
1
0
1/2
9
2
Edition 00 to 01/2018