Nuova Simonelli Microbar II Service Manual page 10

1.4
SAFETY INSTRUCTION
This book is an integral and essential part of the
product and must be given to the user. Read this
book carefully. It provides important information
concerning safety of installation, use and mainte-
nance. Save it carefully for future reference.
All illustrations contained in this manual are
meant for information purposes only.
Your machine may differ slightly from the one
shown here.
Simonelli Group reserves the right to make
changes to production and to the manual without
any obligation to update previous production and
manuals accordingly.
After unpacking, make sure the appliance is com-
plete. In case of doubts, do not use the appliance,
but contact a qualified technician. Packaging
items which are potentially dangerous (plastic
bags, polystyrene foam, nails, etc.) must be kept
out of children's reach and must not be disposed
of in the environment.
WARNING
RISK OF POLLUTION
The machine is can be installed in staff kitchen
areas in shops, offices and other working environ-
ments, farm houses by clients in hotels, motels
and other residential type environments bed and
breakfast type environments.
Before connecting the appliance make sure the
rating plate data correspond with the mains.
This plate is on the front panel at the top right
hand side of the appliance. The appliance must
be installed by qualified technicians in accord-
ance with current standards and manufacturer's
instructions.
The appliance must be installed according to
the applicable federal/national/local standards
1.4
SERVICE MANUAL
(codes) concerning the hydraulic systems includ-
ing back-flow devices. Owing to the above, the
hydraulic connections must be carried out by a
skilled technician. The warranty will be rendered
null and void in case the features of the power
supply do not match the plate data.
The manufacturer is not held responsible for pos-
sible damage caused by failure in earthing the
plant. For the electrical safety of the appliance, it
is necessary to equip the system with the proper
grounding. This must be carried out by a quali-
fied electrician who must ensure that the electric
power of the system is sufficient to absorb the
maximum power input stated on the plate.
The electrician with the apposite qualification
certificate must make sure that the section of the
system cables is suitable to the power absorbed
by the machine.
The use of adapters, multiple sockets or exten-
sions is strictly forbidden. If they prove neces-
sary, call a fully qualified electrician.
For appliances powered at 220-230 V, the maxi-
mum impedance from the mains must below 0.37
Ohm.
When installing the device, it is necessary to use
the parts and materials supplied with the device
itself.
Should it be necessary to use other parts, the
installation engineer needs to check their suit-
ability for use in contact with water for human
consumption.
The machine must be installed in compliance with
the local health standards in force for plumbing
systems. Therefore, contact an authorized service
man.
For connecting the waterline, always use a new
pipe supplied, Do not use old pipes.
The device needs to be supplied with water that
is suitable for human consumption and compliant
Edition 00 to 01/2018