Nuova Simonelli Microbar II Service Manual page 14

1.5 MACHINE IDENTIFICATION
When contacting the manufacturer, Simonelli
Group for any reason, always quote the machine
serial number.
Model Version
Serial
number
Mod. MICROBAR II
S.N. XXXXXX
220 - 240 V
50 / 60 Hz
QR code
Operating Pressure 0,165 MPa
Power supply
Frequency
Mod. MICROBAR II
S.N. XXXXXX
220 - 240 V
50 / 60 Hz
Operating Pressure 0,165 MPa
The machine internet page can be accessed directly
through the QR code.
Download and install one of the apps to read QR
codes on a mobile device.
Start the app and position the camera in front of the
code so that it can be clearly seen.
Wait some time while the app processes the result
and shows the internet page of the machine on the
display.
1.6 TRANSPORT
The machine is transported on pallets which also
contain other machines - all boxed and secured to
the pallet with supports.
Prior to carrying out any transport or handling oper-
ation, the operator must:
well as a set of overalls which must be elasti-
cated at the wrists and ankles.
The pallet must be transported using a suitable
means for lifting (e.g., forklift).
1.8
SERVICE MANUAL
Groups
number
Date of
production
Date 18 / 04 /2016
P = 2200 W
MAX Inlet Pressure 0,65 Mpa
Power
consumption
Optionals
Date 18 / 04 / 2016
P = 2200 W
MAX Inlet Pressure 0,65 Mpa
1.6.1 HANDLING
WARNING
RISK OF IMPACT OR CRASHING
During all handling operations, the operator must
ensure that there are no persons, objects or property
in the handling area.
The pallet must be slowly raised to a height of 30 cm
(11,8 in) and moved to the loading area.
After first ensuring that there are no persons, objects
or property, loading operations can be carried out.
Upon arrival at the destination and after ensuring
that there are no persons, objects or property in the
unloading area, the proper lifting equipment (e.g.
forklift) should be used to lower the pallet to the
ground and then to move it (at approx. 30 cm (11,8
in) from ground level), to the storage area.
WARNING
RISK OF IMPACT OR CRASHING
Before carrying out the following operation, the load
must be checked to ensure that it is in the correct
position and that, when the supports are cut, it will
not fall.
The operator, who must first put on work gloves and
protective footwear, will proceed to cut the supports
and to storing the product. To carry out this opera-
tion, the technical characteristics of the product
must be consulted in order to know the weight of the
machine and to store it accordingly.
WARNING
RISK OF POLLUTION
Once the machine has been removed from the
pallet or the container, do not dump them - pol-
lution hazard.
Edition 00 to 01/2018