Table of Contents
Advertisement
O
PERATION
C
S
LEAN
QUEEGEES
Remove the rear and side squeegee blades and wipe down with a damp towel. (See
C
S
LEAN
ENSORS
The robotic scrubber is equipped with LIDARs, 2D cameras, and 3D cameras, all of which work together
to provide a 270° fi eld of vision for the robotic software. All sensors and cameras constantly surveille the
machine's surroundings for both stationary and moving obstacles. When an obstacle is detected, the machine
will attempt to navigate around it and continue on its robotic route.
Robotic operation relies on all of these sensors; therefore, it is vital to keep all sensors clean and free
from damage. Debris, streaks, or smudges can prohibit the machine's ability to run a robotic route. Clean
all sensors using the provided microfi ber cloth, and inspect each sensor and camera for damage such as
scratches.
38
V4.0119
• Content Subject to Change
S
for details.)
QUEEGEES
Advertisement
Table of Contents
