Table of Contents
Advertisement
E
S
MERGENCY
TOP
The robotic scrubber is equipped with two Emergency Stop (aka E-Stop) buttons, one to the right of the
steering wheel and one on the rear of the machine. If there is an emergency and the robotic scrubber must be
immediately stopped, press one of these red Emergency Stop buttons.
NOTE:
THE ROBOTIC SCRUBBER MAY RELEASE ANY FLUIDS THAT HAVE NOT YET REACHED THE
RECOVERY TANK. MAKE SURE TO MOP UP ANY STANDING FLUIDS TO AVOID A SLIPPING OR FALLING
HAZARD.
If the Emergency Stop button was pressed in error or the emergency has been resolved, perform the
following steps to resume the robotic route:
1. Per UI touchscreen instructions, inspect the
environment and the machine, and clean up any
standing fl uids.
2. Release the engaged Emergency Stop button by
twisting it to the right (clockwise).
O
3. Select CONFIRM to confi rm that any
environmental or machine issues have been
resolved.
4. Press the Start/Pause button on the rear of the
machine to resume the robotic route.
PERATION
V4.0419
• Content Subject to Change
33
Advertisement
Table of Contents
