Brain Corp ICE Robotics RS26 Operational Manual page 30

O
PERATION
10. As the machine begins robotic operation, the
UI touchscreen states Cleaning in Progress,
along with the machine's current location on
the cleaning route, amount of time spent on the
route, and the total amount of time the route is
projected to take in robotic mode.
11. Observe scrubbing performance to ensure that
all components are functioning properly.
12. If any scrubbing functions need adjustment,
press the Start/Pause button on the back of
the machine to pause the robotic route. The UI
touchscreen states Cleaning Paused: Press the
blue button to resume cleaning!
13. Make the necessary adjustments to the brush
pressure, solution fl ow, water fl ow, and/or
squeegees.
- The steering wheel may rapidly and unexpectedly move while operating in robotic mode, which
could cause physical injuries. Do not sit on the operator seat, hold the steering wheel, or put
your hand or arm through the holes of the steering wheel while the machine is operating in
robotic mode.
- The operator seat and steering wheel have joy-ride sensors. If a person attempts to sit on the
seat or hold the steering wheel when operating in robotic mode, the machine will automatically stop and
trigger an alert.
If the machine repeatedly triggers an alert in the same place on a cleaning route, even when
there are no obstructions, there could be an environmental factor such as a refl ection causing
the machine to sense an obstruction in the cleaning path. For help resolving the issue, contact
customer service and provide the Home Location Code number, route letter, area of concern, and
pictures of what the machine sees (if possible). Customer service may be able to remotely adjust
the route to improve performance.
30
V4.0119
• Content Subject to Change
14. Press the Start/Pause button to resume the
route in robotic mode.
NOTE
: IF AN ALERT IS TRIGGERED DURING
THE ROBOTIC ROUTE, THE MACHINE
AUTOMATICALLY PAUSES. THE UI
TOUCHSCREEN DISPLAYS THE ALERT ALONG
WITH STEPS TO RESOLVE. IF A PHONE IS
PAIRED TO THE ROC, THE ROC SENDS A TEXT
MESSAGE OF THE ALERT TO THE PHONE.
15. When the robotic route is complete, the UI
touchscreen displays Cleaning Complete, as well
as route information, length of time spent on the
route, and a map of the route that shows areas
cleaned. If a phone is paired to the ROC, the ROC
sends a Cleaning Complete text message.
16. Select DONE to return to the Main Menu.