Table of Contents
Advertisement
R
R
R
UN A
OBOTIC
OUTE
Once one or more cleaning routes have been taught and saved, the machine can be operated in robotic mode.
When running a route in robotic mode, pairing a cell phone can be a valuable tool. (See
for details.)
1. Insert the ignition key and turn to the right
(clockwise) to turn on the machine.
2. Wait for the UI touchscreen to initialize to enter
the 4-digit Security PIN.
3. Select RUN ROUTE from the Main Menu.
4. Drive to the desired Home Location Code,
positioning the machine so that the right-side
camera scans the Home Location Code. The
machine automatically begins scanning, as
displayed on the UI touchscreen.
5. A Success! Select a route to clean message is
briefl y displayed, followed by a list of all existing
routes for the scanned Home Location Code.
O
6. Select the cleaning route to run in robotic mode.
7. If necessary, adjust the solution fl ow, water
fl ow, and/or brush pressure settings for today's
cleaning needs.
8. Per instructions on the UI touchscreen, secure
the yellow safety straps to block the operator
seat.
9. Press the Start/Pause button on the back of the
machine to start the robotic route. The yellow
warning light fl ashes and the horn sounds to
signal that robotic cleaning is starting.
PERATION
Pair a Phone to the ROC
V4.0419
• Content Subject to Change
29
Advertisement
Table of Contents
