Table of Contents
Advertisement
O
PERATION
A
U
FTER
SE
Perform all of the following tasks after every use. These actions will keep the robotic scrubber operating at
peak performance.
D
C
T
RAIN AND
LEAN
ANKS
1. Drive the machine to an appropriate disposal
drain.
2. Press the One-Touch button to disengage all
cleaning components, if needed. This will raise
the scrub brush and squeegees, as well as turn
off the vacuum motor.
3. Turn the ignition key to the left (counter-
clockwise) to turn off the machine.
4. Put on appropriate personal protective
equipment.
5. Lift the operator seat and use the support stand
to prop open.
6. Remove the recovery tank drain hose on the rear
of the machine.
7. Hold the recovery tank drain hose upward and
remove the cap.
36
V4.0119
• Content Subject to Change
8. Lower the recovery tank drain hose to the liquid
disposal drain to empty the recovery tank.
NOTE
:
IF THE RECOVERY TANK IS NOT
DRAINED WHEN THE CLEAN WATER TANK
IS REFILLED, FOAM OR WATER MAY ENTER
THE FLOAT SHUT-OFF SCREEN AND CAUSE
DAMAGE TO THE VACUUM MOTOR.
9. Open the recovery tank cover.
10. Remove and clean the vacuum fan fi lter and
yellow strainer basket with a damp cloth or low
pressure water hose, if dirty. Dry the fi lter before
putting back in place.
Advertisement
Table of Contents
