Unpacking The Enflow Iv Fluid/Blood Warming System; To Begin Operation Of The Enflow Iv Fluid/Blood Warming System - GE enFlow IV System Manual

Unpacking the enFlow IV fluid/blood warming system

Upon receipt of the enFlow IV fluid/blood warming system components, visually inspect the shipping containers and internal contents for damage that may
have occurred during shipment. If there is any visible or mechanical damage to the contents, or if the order is incomplete, please contact Customer Service
immediately. The components for each model are reflected below:
• Model 100
 Warmer
 Warmer Cord Clip
 IV Line Clip
 USB Manual
 Patient Leakage Report
 Certificate of Conformance
• Model 121
 Controller
 Patient Leakage Report
 Warmer Mount (Warmer Mount Instructions)
 USB Manual
• Model 200
 Disposable Cartridge
 IFU
Model 202
 Disposable Cartridge with IV extension set
 IFU

To begin operation of the enFlow IV fluid/blood warming system

a. Place the Controller on a firm, level surface or on an IV pole with an outside dimension of no greater than 3.0 cm (1.25 in). Two Controllers may also be
mounted next to each other on an IV pole as shown below. The Controller's display will have a right-side-up orientation regardless of its position.
4400-0024-EN Rev A - 9 of 40 -