GE enFlow IV System Manual page 4

Electric Energy
70˚C
Temperature Range
-30˚C
Not made with
DEHP
Di(2-ethylhexyl) phthalate
Manufacturer
Degree of protection provided by enclosure, no ingress of
IP31
object > 2.5 mm diameter, protected against dripping water
Caution: U.S. Federal law restricts this device to sale by or on
Rx ON LY
the order of a physician
Consult Instructions for Use
xx
System Fault XX
Lock or Password Required
Do Not Throw in Trash
Intertek is accredited by OSHA as a NRTL, as well as by the
Standards Council of Canada. This mark indicates that the
CM
C US
product has been tested to CAN/CSA-C22.2 No. 60601-
1:2008 Ed 03, AAMI ES60601-1:2005, IEC 60601-1:2005 Ed
4005716
03, IEC 60601-1 -6:2010 Ed 3 and IEC 60601-1-8: 2006 Ed 2.
4400-0024-EN Rev A
Effect or action in both directions away from reference point
(Open)
Effect or action in both directions towards a reference point
(Close)
In transport applications it is advised to cushion and insulate
the Warmer from the patient's skin and apply the Warmer as
loosely as acceptable checking regularly for signs of potential
pressure-related injury
Degree of protection provided by enclosure, dust tight,
IP67
temporary water immersion
Degree of protection provided by enclosure, dust tight,
IP68
continuous water immersion
Surface may be hot
Do not encase the Warmer with any external coverings like:
towels, sheets, blankets or drapes. Covering the Warmer
restricts the natural convection of heat.
Low Battery
Unlock
The CE Mark is the manufacturer's or importer's mark of
conformity declaring compliance with all applicable directives
(Safety, EMC, Machinery, Medical and others).
Mute the Audible 'High Priority Alarm' For 1 Minute
- 4 of 40 -