Ambtype - Canon WUX6000 User Commands

AMBTYPE

Ambient light type settings
Format
Setting Command
Response
Reference Command
Response
< Ambient light type settings parameter:ID >
Parameter
TG
FL
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM
No No No No
Remarks
(1) This sets the currently selected input signal and image mode.
Example
(Setting)
>AMBTYPE=FL
< i:OK
(Reference)
> GET=AMBTYPE
< g:AMBTYPE=FL
Note: '>' indicates a command; '<' indicates a response.
AMBTYPE=<Ambient light type settings parameter:ID>
i:OK
GET=AMBTYPE
g: AMBTYPE=<Ambient light type settings parameter:ID>
Note: See "Error list" for any response other than the above.
Tungsten lamp
Fluorescent lamp
RS-232C
ON ST PM ON D-RGB
Yes No No Yes Yes
-23-
WUX6000 User Commands
Meaning
Input
A-RGB COMP HDMI
Yes Yes Yes
LAN USB None
Yes Yes Yes