Imageflip - Canon WUX6000 User Commands

IMAGEFLIP

Flip display
Format
Setting Command
Response
Reference Command
Response
< Image flip setting parameters:ID >
Parameter
NONE
CEILING
REAR
REAR_CEILING
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON
No No No No Yes
Remarks
(1) When the display is flipped, the "keystone distortion" settings (HKS, VKS, 4CNR) are
initialized.
Example
(Setting)
>IMAGEFLIP=REAR
< i:OK
(Reference)
>GET=IMAGEFLIP
< g:IMAGEFRIP=REAR_CEILING
Note: '>' indicates a command; '<' indicates a response.
IMAGEFLIP=<Image flip setting parameters:ID>
i:OK
GET= IMAGEFLIP
g: IMAGEFLIP=<Image flip setting parameters:ID>
Note: See "Error list" for any response other than the above.
None
Ceiling mount (upside down and right side left)
Rear (right side left)
Rear, ceiling mount (upside down)
RS-232C
ST PM ON D-RGB
No No Yes Yes
-56-
WUX6000 User Commands
Meaning
Input
A-RGB COMP HDMI LAN
Yes Yes Yes Yes
USB None
Yes Yes