6Axr - Canon WUX6000 User Commands

6AXR

6-axis adjustment (red), hue/saturation/brightness
Format
Setting Command
Response
Reference Command
Response
<R hue:Number> is within -20 to 20
<R saturation:Number> is within -20 to 20
<R brightness:Number> is within -20 to 20
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON
No No No No Yes
Remarks
(1) When 6-axis adjustment is turned on, these settings are shown over the displayed image.
However, the settings can be changed regardless of whether 6-axis adjustment is turned on or
not.
(2) This sets the currently selected input signal and image mode.
Example
(Setting)
>6AXR=-8,5,3
< i:OK
(Reference)
> GET=6AXR
< g:6AXR=-8,5,3
Note: '>' indicates a command; '<' indicates a response.
6AXR=<R hue:Number>,<R saturation:Number>,
<R brightness:Number>
i:OK
GET=6AXR
g:6AXR=<R hue:Number>,<R saturation:Number>,
<R brightness:Number>
Note: See "Error list" for any response other than the above.
RS-232C
ST PM ON D-RGB A-RGB
No No Yes Yes
-15-
WUX6000 User Commands
Input
COMP HDMI LAN
Yes Yes Yes Yes
USB None
Yes Yes