Saveimgprof - Canon WUX6000 User Commands

SAVEIMGPROF

User memory creation/storage/deletion
Format
Setting Command
Response
Reference Command
Response
< User memory save to parameter:ID >
Parameter
USER_1
USER_2
USER_3
USER_4
USER_5
DEL_ALL
< User memory presence parameter:ID >
Parameter
0
1
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON
No No No No Yes
Example
(Setting)
>SAVEIMGPROF=USER_2
< i:OK
(Reference)
> GET=SAVEIMGPROF
< g:SAVEIMGPROF=5:1,0,1,0,0
Note: '>' indicates a command; '<' indicates a response.
SAVEIMGPROF=<User memory save to parameter:ID>
i:OK
GET=SAVEIMGPROF
g:SAVEIMGPROF=<Number of user memories>:<User 1 present
parameter>,<User 2 present parameter>,<User 3 present
parameter>,<User 4 present parameter>,<User 5 present parameter>'
Note: See "Error list" for any response other than the above.
Meaning
Save to User 1
Save to User 2
Save to User 3
Save to User 4
Save to User 5
Delete all User memory
Meaning
User memory not created
User memory created
RS-232C
ST PM ON D-RGB A-RGB
No No Yes Yes
-80-
WUX6000 User Commands
Input
COMP HDMI LAN
Yes Yes Yes Yes
USB None
Yes Yes