Table of Contents
Advertisement
INTUITY Messaging Solutions Release 5 Migration Procedures
Preadministering the INTUITY AUDIX Extension
Lengths
18
21. Press F3 (Enter).
The system displays the following message:
Shutdown complete
22. Remove the DEFINITY AUDIX from the switch, remove the
short cable, and reinstall the tape drive.
23. Reassemble the DEFINITY AUDIX migration kit.
24. Return to the Migration Checklist (page 2).
Before you transfer data from the DEFINITY AUDIX system to the
INTUITY AUDIX system, you must ensure that the INTUITY AUDIX
system is preadministered to match the DEFINITY AUDIX system
extension length.
To preadminister the extension length:
1. From the INTUITY Main Menu, select:
Switch Interface Administration
DCIU Interface Administration
The system displays the DCIU Interface Administration screen.
2. Compare the Extension Length : field on the DCIU
Interface Administration screen and the Extension Length:
field on the DEFINITY AUDIX Machine Profile screen printout.
If the extension lengths:
n
Match, press F6 (Cancel) and return to the next task in the
checklist.
n
Do not match, press the TAB key to move the cursor to the
Extension Length: field and enter the extension length
on the INTUITY AUDIX system.
3. Press F3 (Save) to save the extension length change.
The system displays the following message:
command successfully completed
4. Press F6 (Cancel) to return to the INTUITY Main Menu.
585-313-118 Issue 4
June 2002
Advertisement
Table of Contents
