Table of Contents
Advertisement
Recording the DEFINITY AUDIX Profile Information
Table: Required Profile Information
Screen
System-Parameters
Customer-Options
Machine Profile,
page 1
List Machines
June 2002
You need the following information before you begin the migration.
Check to see whether the migration planning worksheets were completed
prior to your arrival.
There are three ways to record and enter the preadministration
information:
n
Use the Required Profile Information (page 5) table for the
command to display the DEFINITY AUDIX screen, then type the
information into the INTUITY AUDIX directly.
This is used when the switch and INTUITY AUDIX machines
are physically located near each other. This is done the day of the
migration.
n
Print the Required Profile Information (page 5) table, use the
commands to display the DEFINITY AUDIX screen, and then
write the DEFINITY AUDIX data in the Information column.
This is used when the two systems are located in different rooms
or buildings and there is no printer available to connect to the
DEFINITY AUDIX. It can be done before the day of the
migration.
n
Follow the steps in Connecting a Printer (page 6) to the
DEFINITY AUDIX, use the Required Profile Information
(page 5) table for the command to display the DEFINITY
AUDIX screen, and then press Control+Z to print the screen.
This is used when the two systems are located in different rooms
or buildings and a printer is available to connect to the
DEFINITY AUDIX. It can be done before the day of the
migration.
Command
Information Needed
display
Switch integration type.
system-parameters
Either embedded or
customer-options
control-link.
display machine
Extension length of the local
DEFINITY AUDIX system.
list machines
Networked machine names
and voice IDs.
585-313-118 Issue 4
Migrating from DEFINITY AUDIX
Information:
5
Advertisement
Table of Contents
