Preparing To Use The Dvd; When Connecting The Unit And The Tv Using; The Dvd Output Jack; When Connecting The Unit And The Tv Using Only The Dvd/Vcr Shared Output Jack - Sharp DV-NC60W Operation Manual

Preparing to Use The DVD

The following steps are necessary to display the DVD screen on the
TV.

When connecting the Unit and the TV using

the DVD output jack

TV
Turn on the TV and switch the TV channel to the external input
"VIDEO" or "AV" channel connected to DVD output jack.
This Unit
1
Press OPERATE.
• The start up screen is displayed on the TV screen.
2
Move VCR/DVD CHANGE Switch on the remote control to
DVD.
When connecting the Unit and the TV using
only the DVD/VCR shared output jack
TV
Turn on the TV and switch the TV channel to the external input
"VIDEO" or "AV" channel connected to DVD/VCR shared output jack.
This Unit
1
Press OPERATE.
2
Move VCR/DVD CHANGE Switch on the remote control to
DVD.
3
Press VCR/DVD SELECTOR to enter the DVD mode.
• The DVD Output indicator will light up and the start up screen
will be displayed on the TV screen.
78
GB
DVNC60W(E)#078_084.pm6
Downloaded from: http://www.usersmanualguide.com/
78
EJECT/
OPERATE STOP
REW PLAY/X2
C H REC
LINE IN 2 VIDEO L(MONO)-AUDIO-R
DVD Output
OPERATE
indicator
TIMER
OPERATE
G-CODE EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ZOOM
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
01.10.11, 9:32 am
DVD / CD / VIDEO CD PLAYER
OPEN/
VCR DVD CLOSE
(LINE 2)
DVD PLAY STOP
OUT